Before Using
the
Product
Read this manual cover
to
cover before attempting to
use
SmartLab
SE.
Carefully read the Guidelines for
safe
use
of
the
X-ray diffractometer described in the beginning
of
this manual.
Copyrights
1. Duplication
or
reproduction
of
this manual in whole
or
in
part
is strictly prohibited, whether
via hardcopy
or
electronically.
If
copies must be made, you must obtain
our
written approval
before doing so for each specific case.
2.
No
part
of
this manual may be disclosed to third parties.
If
the contents
of
this manual must be
disclosed to a third party, you must obtain
our
written approval before doing so for each
specific case.
3.
No
part
of
this manual may be cited without
our
permission.
No
part
of
this manual may be
translated
or
disclosed to a
third
party without permission.
If
you must cite
or
translate any
part
of
this manual, you must obtain
our
written approval before doing so for each specific
case.
4. In general, unless special agreements
are
reached, each product unit is included with a copy
of
this manual.
5. The contents
of
this manual
are
subject to change without notice.
Liability
1. Rigaku shall not be held liable for any accidents caused by
or
resulting from any
of
the
following.
* Use
of
the product for a purpose other than the purpose intended
* End
of
product life
* Unauthorized modifications
* Inadequate maintenance by the user
* Natural phenomena, armed conflicts, civil disturbances
* Use
or
action in breach
of
instructions given in this manual
* Installation conditions failing to meet the recommended ambient parameters
* Consumables
2. Rigaku Corporation cannot be responsible for the results
of
using this manual to operate the
product
or
the effects
of
the results
of
such operation.
Relocation
Please contact Rigaku Corporation before attempting
to
move
the product
from
the originally installed
location.
To Next Page
Loading...
