Rigaku
Incident
optics
unit
112
I incident optics unit # 2
The optical device used to condition the incident X-ray beam is installed
on
the
incident optics unit #2.
As
the optical device, either the incident Soller slit
or
the 2-bounce
monochromator
can
be
se
lected.
Incident parallel slit adapter (IPS adapter)
This adapter is used to install an incident So
ll
er
slit.
Incident parallel slit
adapter
1 Install the incident parallel slit
adapter
to
the CBO unit
by
sliding
it
down from the top section
of
the CBO unit. Sec
ure
it in place with the
Allen wrench provided.
SmartLab SE: Automated Multipurpose X-ray Diffractometer
27
To Next Page
Loading...
