Contact us at support@RIGDOO.tech
steps to follow:
Check the interface type on your external device (e.g., micro USB,
Type-C, or Lightning).
Visit an online marketplace such as Amazon and search for a
USB-to-interface OTG accessory that matches the interface type of
your external device.
If your mobile phone has a Type-C interface, you can purchase a
USB to Type-C OTG component specifically designed for Type-C
connections.
By obtaining the appropriate OTG component, you will be able to
connect your camera to the external device and access its features
and functions..
13. Q:Why is my camera normal in test mode, but unable to take
pictures in on mode?
A: These cameras have exceptional target detection capabilities
within the horizontal range. However, for targets within the vertical
range, it is necessary to adjust the height and angle accordingly. If
you have already determined the desired height, it is recommended
to angle the camera sensor and lens towards the target area. This
ensures that the camera captures the movement accurately within
the expected range. By adjusting the angle, you can optimize the
camera's performance and enhance its effectiveness in detecting
targets within the vertical range.
14. Q: Why is there fog in my HT-10, is it leaking?
A: The presence of fog inside the HT-10 camera is not a sign of
leakage. It is caused by the temperature changes and the air
trapped inside the camera. When the temperature fluctuates, the air
To Next Page
Loading...