Contact us at support@RIGDOO.tech
currently protected by the camera. This protection only applies to
prevent users from accidentally clicking to the delete button to
delete photos and cannot prevent data loss due to memory card
failure.
6) [Export files]: Export files from the memory card to
computer.
Turn off the camera, connect the USB cable.
HT-10 screen has displayed " MSDC " is indicated it has entered
the connection mode.A new removable disk will be displayed in
your computer.
At this point you can access the files on the memory card ,
just like you would use any other storage device.
HT-10's USB port also supports smartphone connection.
However. It requires you to purchase a separate OTG component
for expanding the smartphone interface to ensure connection to
the camera. (Type-C or Micro USB)
INSTALLATION
If you want to put the camera on a tree.
To install the back bracket onto the camera, follow these steps:
Locate the bottom nut on the camera.
Align the back bracket with the bottom nut.
To Next Page
Loading...