12 13
1.6 Sample Size Example
The recommend sample volume is 0.75 to 3.0μL. Too large sample may contaminate the auto-
code holder, too small sample may lead to the error message (error code 1004). If this occurs,
repeat the test with a new test strip (For detail indication about sample size, please refer to Blood
Glucose Test Strip GS770 Insert).
1.7 Interfering Substances
Before use, please refer to the RIGHTEST Blood Glucose Test Strip GS770 Insert for information
on interfering substances.
1.8 Limitation
- This product is not intended for use at more than 10,745 feet (3,275m) above sea level.
- This product is not intended for plasma or serum testing. Please use a whole blood sample.
- Before use, please carefully read the RIGHTEST Blood Glucose Test Strip GS770 Insert. (which
contains information on blood samples, hematocrit, and interfering substances).
RIGHTEST Blood Glucose Monitoring System RIGHTEST Blood Glucose Monitoring System
1.5 Auto-Code Holder
The auto-code holder automatically detects the code of a test strip. Our test strips deliver
consistent performance without manual coding. The auto-code holder is reusable. When
the auto-code holder is contaminated or damaged, please contact our customer service for
replacement and installation.
Important information
- The auto-code holder automatically calibrates the strip when inserted into the device.
The auto-code holder is reusable unless damaged of contaminated. However, strips
are intented for single use only.
- If the auto-code holder is not functioning properly, please contact our customer
service. Do not try to remove it on your own.
To Next Page
