RIGOL
2-56 © Copyright RIGOL Technologies, Inc. 2007.
User Manual for DM3000 Series
To set up the scanning task
Press Task, enter the main interface to set up the scanning task.
Figure 2－68
Press Add, setting one of the entry in the scanning task.
Figure 2－69
Table 2－41
Function
Menu
setting Explanation
Chanl
Use the up/down key to select
which channel the task will use
Func Select the measure function
Range Select the proper range options
Res Select the digits reading precision
Sa
Set the number of the sampling for
the task
Done Store the changing and return
You can delete or edit the setting task if in need.
Figure 2－70
The appended task would be added at the end of the created scanning
table orderly, when it comes to deleting or editing, it means to operating
the current task.
To Next Page
Loading...
