RIGOL
3-8 © Copyright RIGOL Technologies, Inc. 2007.
User Manual for DM3000 Series
(3). Press Unit Æ ℃，select the unit of the sensor: ℃.
Figure 3－15
When you finish a proper input, press
, save all the changes, back to a
higher level menu.
3. Press Define, button enter the interface shows below.
Figure 3－16
4. Press Add button，input the first group of reference value: 111.480Ω、29.5℃。
Figure 3－17
When finishing this group of reference value, press Done button, save all
changes, and go on inputting other values.
Figure 3－18
In this interface you are allowed to delete and edit the reference values that you
had inputted, select the group of reference value then press Del or Edit do the
operations that you want to.
When you finish inputting all the data, press
and save all the changes, back
to a higher level menu.
To Next Page
Loading...
