RIGOL
© Copyright RIGOL Technologies, Inc. 2007. 2-29
User Manual for DM3000 Series
Document Storage
In local/U-disk storage area, you allowed to save, load and delete parameter, data
and sensor documents.
Choose the storage area of the files
Press Æ Disk, choose Local storage or U-Disk rout.choose C:\, and the default
fype is “SysSetting”.
Figure 2-27
Choose the storage type of the files
Press Æ Type , choose the type “MeasData” of the files, into the menu shown
below:
Figure 2-28
Press Æ Type , choose the type “Datalog” of the files, into the menu shown
below:
Figure 2-29
Press Æ Type , choose the type “Sensor”, “SensorData”, “ScanTask” of the
files, into the menu shown below:
To Next Page
Loading...
