RIGOL
4-2 © Copyright RIGOL Technologies, Inc. 2007.
User Manual for DM3000 Series
11．GPIB address is 1 to 30
GPIB I/O interface address setting value scope: 1~30.
12．Frequency is 0 to 1MHz
In limit test and null value settings the frequency setting value scope is 0~1MHz.
13．DCV is -1200V to 1200V
In limit test and null value settings the DC voltage setting value scope is
-1200V~1200V.
14．ACI is 0 to 12A
In limit test and null value settings the DC current setting value scope is 0~12A.
15．dB is -200dBm to 200dBm
In dB measurement function, the dB setting value scope is -200dBm ~200dBm.
16．dBm is 0 to 8000Ω
In dBm measurement function, the setting value scope is 0~8000Ω.
17．ACV is -900V to 900V
In limit test and null value settings the AC voltage setting value scope is
-900V~900V.
18．DCI is 0 to 12A
In limit test and null value settings the AC current setting value scope is 0~12A.
19．Maximum value is **
Currently measurement function Max setting value: **.
20．Minimum value is **
Currently measurement function Min setting value: **.
21．Unused
The measurement for the forestall measuring function is unused for currently
measuring function.
To Next Page
