Sets all the measurement parameters.
Performs math operations (statistic, P/F, dBm, dB, REL) for measured
results and displays real-time measurements in trend graph and
histogram.
Provides auto, single, external and level trigger sources; enables to
set the reading hold function, samples per trigger, delay time before
reading and edge of the trigger input signal as well as the trigger
output parameter.
Saves, recalls and deletes data and parameter files from both internal
memory and external USB devices.
Sets the command set, interface parameters and system information,
tests the multimeter and displays error messages.
Provides common help information and the method to use built-in
help. The multimeter allows users to quickly recall the help
information about any front panel keys and menu softkeys.
9. Range/Direction Keys
Enables auto range.
Configures the measurement parameters.
Selects the digit position while entering a parameter.
Increases or decreases the measurement range.
Enters desired numeric value while setting a parameter.
Pages up or down.
To Next Page
Loading...
