Rigol PVA7000 Series User Manual

RIGOL
User Guide for PVA7000 Series Active Probe 11
4. To disconnect the probe from the oscilloscope, press the button on the
probe (as shown in the left figure below), pull the connector straight out of
the oscilloscope (as shown in the right figure below) and then release the
button.
CAUTION
Do not twist the probe on the BNC connector of the oscilloscope.
Otherwise, the probe might be damaged.
www.GlobalTestSupply.com
Find Quality Products Online at: sales@GlobalTestSupply.com

Rigol PVA7000 Series Specifications

General

Brand	Rigol
Model	PVA7000 Series
Category	Diagnostic Equipment
Language	English