Chapter 2 Functions of the Front Panel of GPSA RIGOL
RSA5000 User Guide 2-37
VSWR
Enables or disables the VSWR measurement function. When the VSWR measurement
function is enabled, the user interface is divided into two sections automatically (the
lower section provides the measurement wizard). At this time, you can perform the
VSWR measurement according to the wizard. Press Meas Setup to set the
corresponding parameters.
Tip:
The VSWR bridge and tracking generator are required in VSWR measurement.
Therefore, this function is only available for the instrument installed with VSWR
bridge and the tracking generator option. When the VSWR measurement is
enabled, the tracking generator is enabled automatically, and the backlight of TG
on the front panel turns on.
To Next Page
Loading...
