RIKA Pico - Extended Heating Operation - HEAT MODE - Comfort Funktions

16
Extended heating operation ‑ HEAT MODE ‑ comfort funktions
In addition to the basic functions of simple heating operation, the RIKA pellet stove provides extra comfort functions. However, before you can use the comfort
functions such as frost protection and child safety device, or the optional functions such as an external room thermostat or regulation of the stove via mobile phone,
you have to change from simple heating to comfort mode.
comfort functions
display panel
display of
respective operating status
Switch between EASY and HEAT modes
press menu key for at least 5 seconds
selection of comfort function
required HEAT/AUTO/ROOM
by pressing the I/O key
MENU
MENU
HEAT
ROOM
EASY
5050
MENU
change heat output by
pressing the „+“ or „-“ key
(change in 5 % increments)
change heat output by
pressing the „+“ or „-“ key
(change in 5 % increments)
menu item mode only active
in connection with the RIKA room sensor
or the RIKA wireless room sensor
HEAT
O FF
EASY
O FF
IGNIT
START
MODE
HEAT
AUTO
IGNIT
START
key display description
EASY OFF Standard display for stove switched off in simple heating mode.
MENU
Pressing for at least 5 seconds changes to HEAT mode. The change is also shown in the display as confirmation.
HEAT OFF Standard display for stove switched off in extended heating mode. (comfort functions can now be selected)
MENU
Pressing once changes to display MODE
MODE
You can select one of three possible stove comfort functions. (the menu item Mode is only active in connection with the RIKA
room sensor or the RIKA wireless room sensor active).
Pressing once takes you to the comfort function selection and you can change between the individual comfort functions using
keys and .
HEAT
AUTO
ROOM
Pressing again confirms the comfort function currently visible HEAT, AUTO or ROOM.