Need help?Do you have a question about the Riken Keiki EC-5002 and is the answer not in the manual?
General| Type | Portable gas detector |
|---|---|
| Detection Gases | Combustible gases, O2, H2S, CO |
| Sampling Method | Diffusion |
| Detection Principle | Catalytic combustion (combustible gases), Galvanic cell (O2), Electrochemical cell (H2S, CO) |
| Display | LCD |
| Alarm Method | Audible alarm, visual alarm, vibration alarm |
Explains the meaning of safety-related terms used in the manual for hazard identification.
Details critical hazards and situations that could cause serious damage or injury.
Outlines important precautions to prevent serious damage to health or assets.
Lists general safety precautions to ensure proper handling and operation of the unit.
Specifies environmental and physical conditions to avoid during unit installation.
Provides guidelines for integrating the unit into a system, focusing on power, noise, and lightning.
Explains how the unit triggers alarms (visual and contact) when gas concentration thresholds are met.
Describes how the unit indicates internal faults or sensor abnormalities with visual and error messages.
Guides users through advanced maintenance procedures and parameter settings for optimal performance.
Explains the procedures for performing zero and span adjustments using calibration gases.
Lists common unit symptoms, their potential causes, and recommended troubleshooting actions.
Addresses issues related to incorrect or unstable readings, their causes, and corrective measures.
To Next Page
