Need help?Do you have a question about the Riken Keiki OX-5001 and is the answer not in the manual?
General| Model | OX-5001 |
|---|---|
| Category | Security System |
| Type | Portable Gas Detector |
| Detection Gas | Oxygen (O2) |
| Resolution | 0.1% |
| Accuracy | ±0.5% vol |
| Alarm Method | Audible alarm, Visual alarm |
| Display | LCD |
| Material | ABS Plastic |
Alerts about critical safety hazards and non-explosion-proof nature.
Details potential risks and precautions for safe operation.
Lists critical warnings and necessary actions for safe use.
Provides recommended cables and wiring specifications.
Overview of unit modes and transitions between them.
Step-by-step guide for powering on and initializing the unit.
Detailed explanation of various operational modes and their functions.
Procedure for testing alarm functions and external circuit transmissions.
Step-by-step guide for performing zero adjustment in user mode.
How the unit detects and signals gas alarms, including self-latching.
How the unit signals and recovers from internal faults.
Explanation of 4-20mA and RS-485 output signals and their modes.
Outlines recommended maintenance schedules and tasks.
Procedures for gas testing and basic calibration in maintenance mode.
General process for calibrating the unit using calibration gas.
Detailed steps for performing zero calibration on the detector head.
Steps for span calibration for single-range detector heads.
Steps for span calibration for dual-range NC-5001W models.
Lists common unit symptoms, causes, and troubleshooting actions.
Common issues with readings and their potential causes and solutions.
To Next Page
