Riken Keiki RM-5003 User Manual

PT1E-10511
Indicator/Alarm Unit
RM-5000 Series
Operating Manual

Riken Keiki RM-5003 Specifications

General

Brand	Riken Keiki
Model	RM-5003
Category	Security System
Language	English

Summary

1-3. Safety Alert Definitions

2 Important Notices on Safety

2-1. Danger Cases

Lists potential hazards and dangerous situations.

2-2. Warning Cases

Lists warning conditions and precautions for safe operation.

2-3. General Precautions

Provides essential precautions for proper use and maintenance.

4 How to Use

4-2. Installation Point Precautions

4-3. System Design Precautions

4-4. How to Install

4-5. How to Wire

Recommended cables and wiring procedures for connections.

5 How to Operate

5-1. Preparation for Start-up

5-2. Basic Operating Procedures

5-3. Starting the Unit

Step-by-step guide for powering on and initiating the unit.

5-4. Operating Modes

5-5. Detection Mode

5-6. Alarm Test Mode

Procedure for performing alarm tests to check functionality.

5-7. User Mode

5-8. How to Exit

6 Operations and Functions

6-1. Gas Alarm Activation

Explains how gas alarms are triggered and indicated.

6-2. Fault Alarm Activation

Describes fault alarms, error messages, and recovery.

6-3. External Output Operation

7 Maintenance

7-1. Maintenance Intervals and Items

7-2. Regular Maintenance Mode

Details the steps and options within the regular maintenance mode.

7-3. Gas Calibration Method

Instructions for performing zero and span adjustments using calibration gas.

9 Troubleshooting

9-1. Unit Abnormalities

Lists symptoms, causes, and actions for unit malfunctions.

9-2. Reading Abnormalities

Lists symptoms, causes, and actions for reading-related issues.