Need help?Do you have a question about the Riken Keiki GP-5001 and is the answer not in the manual?
General| Model | GP-5001 |
|---|---|
| Type | Portable Gas Detector |
| Response Time | Within 30 seconds (90% response) |
| Display | LCD with backlight |
| Alarm Set Point | Adjustable |
| Operating Temperature Range | -20°C to +50°C |
| Ingress Protection | IP67 |
| Explosion Proof | Ex ia IIC T4 Ga |
| Operating Humidity | 0 to 95% RH (non-condensing) |
| Detection Gas | Combustible gases |
| Detection Principle | Catalytic combustion |
| Measurement Range | 0-100% LEL |
| Power Supply | Rechargeable Li-ion battery |
| Alarm | Visual, audible, and vibration |
Specific hazardous situations to avoid.
Critical precautions to prevent damage or injury.
General safety advice and operational warnings.
Guidelines for selecting safe and effective locations.
Considerations for integrating the unit into a system.
How gas alarms are triggered and indicated.
Conditions and indications for unit malfunctions.
How the unit communicates data externally.
Procedures for accessing and performing maintenance.
Steps for calibrating the unit using calibration gas.
Lists unit errors, causes, and solutions.
Details issues with measured values and their resolutions.
To Next Page
