ring AutoTester RMM500 - Page 11

11
5.6 Resistance measurement
The tester can measure resistance from 0.0Ω up to 1.0MΩ which includes and auto ranging funcon.
1. Turn Selector Dial to Resistance Mode (Ω posion)
2. Connect probes to either end of component or circuit to be measured
3. Resistance of circuit will be displayed
5.7 Frequency measurement
The frequency mode is able to measures the speed and shape of pulses in a circuit to help diagnose problems parcularly with sensors.
7. Aer 3 seconds the display will conrm all results are available for review
8. Press
buon to connue
9. Use
keys to move between results screens
10. Press exit buon
to return to Main Menu
Note:
Results are stored in temporary memory and will be lost aer pressing exit
Short circuit Normal resistance Over 1.0MΩ limit
GB
10422 RMM500 Instructions UK 140x170mm 15pp MULTI LANGUAGE.indb 11 23/08/2017 17:13