To Next PageTo Next PageHow to fix ring Power Pack that does not recharge?
If your Ring Power Pack does not recharge, it might be due to accessories connected to the 12v DC socket. Disconnect any accessories that are plugged in. Alternatively, the 220/240v AC mains charger could be damaged. If this is the case, replace it with a new one: RPT45/REPT45.
What to do if ring Power Pack is not charged after previous use?
The battery could be damaged because it was not recharged after previous use. Replace the battery with 1 x RPP103 (7Ah) for models RPP145 / REPP145, or 1 x RPP109 (9Ah) for models RPP148 / REPP148.
What to do if the polarity alarm sounds on ring Power Pack?
If the polarity alarm sounds, it means the jump start cables are connected incorrectly. To resolve this, ensure you connect the jump start cables the correct way.
Why doesn't my ring Power Pack jump start the vehicle?
If your Ring Power Pack doesn't jump start the vehicle, there are a few potential reasons. First, the Power Pack might not be fully charged; in this case, charge it using a 220/240v AC charger for 24 hours. Second, the Power Pack battery may be damaged, requiring a replacement: use battery 1 x RPP103 (7Ah) for models RPP145 / REPP145, or 1 x RPP109 (9Ah) for models RPP148 / REPP148. Finally, the Power Pack might not be large enough for your vehicle; check the rating of your Power Pack against your vehicle's requirements.
General| Brand | ring |
|---|---|
| Model | RPP148 |
| Category | Power Pack |
| Language | English |
Details product variations for UK and Euro markets.
Essential step to charge the PowerPACK before initial operation.
General overview of the PowerPACK product and its purpose.
Itemized list of what is included in the PowerPACK box.
Detailed explanation of product features and functions.
Explanation of Polarity LED and Battery Power Test function.
Description of Battery Clamps and high-power USB sockets.
Description of the built-in LED light.
Step to switch off the vehicle's ignition before jump starting.
Instruction to set the main power switch to OFF.
Guidance on placing the Powerpack on a flat surface away from engine parts.
How to verify correct booster cable connection using the green light.
Warning to keep cables away from moving engine parts.
Instruction to set the main power switch to ON.
Step to select neutral gear for the vehicle.
How to fast charge the Powerpack while the vehicle engine is running.
Instruction to set the main power switch back to OFF.
Steps to safely disconnect the booster cables.
Information on when and how to recharge the Powerpack.
Description of the high-power 2.1A USB socket.
Solutions for common problems like jump start failure or no recharge.
List of available replacement parts for the PowerPACK.
Technical specifications for the PowerPACK models.
