ring RPP70 - Safety Features; Reverse Polarity Protection; Anti-Arc Protection; Circuit Protection

1
2
3
Contents
Safety
Caution
RPP70 PowerPack Instructions
AC Mains Charger
Input: 220/240v
Output: 13.5v 500mA
Replacement part number: RPT50
Reverse Polarity Protection
Ensure no power is transfered if
the booster cables are connected
incorrectly.
To maintain optimum performance and long term life this PowerPack must
be fully recharged:
• Every 3 months if not used
• Before each use
• After each use
• From complete discharge the PowerPack will take 30 hours to fully charge
Anti-Arc Protection
The battery clips will not spark if
touched together.
Circuit Protection
Prevents too much power draw from
the DC outlet, prevents surging.
12v
only
<40°c
12v
only
Powering 7Ah PowerPack Instructions.indd 2 30/04/2010 13:39