ring RSC500 - User Manual

Instructions
Maintenance 12v SmartCharge+
RSC500 / RESC500
0.8A
Maintenance 6v / 12v SmartCharge+
RSC501 / RESC501
0.8A
SmartCharge+4
RSC504 / RESC504
2/4A
SmartCharge+8
RSC508 / RESC508
2/4/6/8A
SmartCharge+12
RSC512 / RESC512
2/4/8/12A
SmartCharge+16
RSC516 / RESC516
2/4/8/16A
Retain these instructions for future reference
Ensure area is well ventilated
www.ringautomotive.co.uk
6v 12v

ring RSC500 Specifications

General

Battery Voltage	6V/12V
Charging Current	5A
Suitable for Start-Stop batteries	Yes
Reverse Polarity Protection	Yes
Battery Type	Lead Acid, Gel, AGM
Output Voltage	6V/12V
Protection Features	Short Circuit, Overheat

Summary

Instructions and Product Overview

Safety Precautions

Battery Charging - Connection

Charging a Battery Within the Vehicle

Steps for connecting the charger to a battery inside a vehicle.

Charging a Negatively Grounded Battery

Specific instructions for negative ground battery connection.

Charging the Battery Removed from the Vehicle

Steps for connecting the charger to a battery outside a vehicle.

Battery Charging - Operation

Ensure Safe Connection

Initial steps for safe charger connection to the battery.

Connect AC Power Lead

Connecting the charger to the AC power supply.

Set Correct Voltage (RSC501;RESC501)

Setting the correct voltage for RSC501/RESC501 models.

Indefinite Connection

Charger can remain connected for continuous maintenance.

Disconnect Procedure

Procedure for safely disconnecting the charger.

Charging Stages Explained

Desulphation

Stage to break down lead sulphate crystals.

Soft Start

Gradual build-up of charging current.

Bulk Charge

Main charging phase, applying 80% of charge.

Absorption

Stage for reaching full capacity with declining current.

Battery Test

Automatic discharge test for battery condition.

Recondition

Float Stage

Charge Rates and Display Information

Specifications