Shut power off at the breaker.
If you don’t know where your breaker is or how to turn
off power to your electrical box, consult with a licensed
electrician.
Hang the box cover.
Inspect the box to make
sure water can’t get in.
Then use the included
hanging hook to hold the
weatherproof box cover in
place as you wire it in.
Remove your existing light or camera. (if applicable)
With power off at the breaker, remove your existing
floodlight or camera from the electrical box and disconnect
the wires. If there is a bracket attached to your electrical box,
remove that as well.
1312
Spotlight_Cam_Wired_Hardwire_Kit_MANUAL_v7.indd 13 6/1/20 9:19 PM
To Next Page
Loading...