Need help?Do you have a question about the Rinieri ELX Series and is the answer not in the manual?
Verify manual condition, keep it for machine life, request replacements if lost.
Check machine condition on receipt, note details for inquiries, and handle packaging correctly.
Read instructions carefully, especially safety, before operation.
Suitable for vineyards/orchards, slopes, rocky terrain, with specific soil conditions.
Tractor connection, electrical hookup, hydraulic oil, cardan shaft, and stability checks.
Check for identification tag; machines without it are anonymous and dangerous.
Understand the meaning of safety adhesives and replace illegible ones immediately.
Explains danger symbols for people, machine damage, and environmental protection.
Stay seated, wear protective gear, avoid loose items, consult authorities for safety.
Using machine for unintended purposes or by unauthorized persons.
Not following manual, using non-genuine parts, or unauthorized repairs.
Read manual, check installation, clear area, start PTO slowly, adjust speed and depth.
Maintain safe distance, use PTO at 400 RPM, disconnect power when stopping.
Machines pose risks; ensure security devices are in place and authorized personnel only.
Registering proximity sensor cams for correct functioning of working heads.
Controls side shifting near trees for automatic positional adjustment.
Modify side shifting, set counting range, memorize changes, and reprogram if needed.
Do not allow unauthorized people, ensure machine is off, use protective gear.
Wash with neutral products, dry carefully, avoid solvents, replace adhesives.
Check tubes, oil levels, filters, use correct oil, and dispose of used oil properly.
Check tools, structure, adhesives, and replace parts as needed.
Check general condition, connections, and lever movements.
Grease points as indicated, follow schedule for cardan joint, rotating joints, and gearboxes.
Check tool wear, replace broken cutters and worn tines, ensure equal tine length.
Block machine securely, use adequate hoisting equipment, comply with safety standards.
Dismount carefully, clean, park on level surface, store safely away from elements.
Render inoperative by cutting tubing, disassembling, and removing nameplate.
Mention code number and machine roll number for gear-box parts.
12-month guarantee, covers defects, excludes negligence, misuse, or tampering.
To Next Page
General