1 TB-142
2/2018
Technical Bullen 142 - Control-R™ Recirculaon Accessory Pairing
The purpose of this technical bulleng is to communicate an update to the pairing instrucons for all Control-R™ recirculaon
accessories. Updates include the following:
• Ensuring the module LED has been red for at least one minute prior to beginning the pairing process.
• Aer all devices have been paired, use a pin or small tool to press the “Reset” buon on the module in order to reset the
module. Wait one minute aer reboot has occurred and LED is red before aempng to iniate recirculaon with the Wi-Fi
accessory.
Push Buon Moon Sensor Temperature Sensor
Part Number
RWMPB01
Part Number
RWMMS01
Part Number
RWMTS01
If you have support quesons, please call Customer Care and have your Control-R™ module’s
AYLA ID and Water Heater Serial Number available.