Why Rinnai App cannot detect Local Area Network (LAN) Wi-Fi signal?
If the Rinnai App isn't detecting the Local Area Network (LAN) Wi-Fi signal, make sure the LAN Wi-Fi meets the module's requirements. Also, verify that your Wi-Fi router is powered on and working correctly, and that the LAN Wi-Fi is functioning. The module should also be in a location with a strong Wi-Fi signal.
What to do if Local Area Network (LAN) Wi-Fi signal is detected but the Rinnai App cannot connect to Rinnai Control-R Wireless Router?
If the Local Area Network (LAN) Wi-Fi signal is detected but the Rinnai App can't connect, first ensure that you've entered the correct LAN Wi-Fi password, if one is required. If the password is correct, try canceling the setup process in the Rinnai App and then repeat the setup from the beginning, starting with pairing the module with the Rinnai App.
What to do if Rinnai Wireless Router module is paired and connected (LED is blinking blue) to Local Area Network (LAN) Wi-Fi but registration is interrupted?
If the module is paired and connected to the Local Area Network (LAN) Wi-Fi, but the registration is interrupted, return to the Add Device screen. Press the Connect button on the module and then press the Register button in the Rinnai App.
How to fix the issue when the LED on Rinnai Control-R Wireless Router module does not turn on?
If the LED on the module doesn't turn on, ensure the module is properly connected to the Terminals for Control on the PC Board. Also, make sure power is supplied to the water heater.
General| Connectivity | Wi-Fi |
|---|---|
| Wireless Standard | IEEE 802.11 b/g/n |
| Frequency Band | 2.4 GHz |
| Compatibility | Rinnai tankless water heaters |
| Functionality | Remote control and monitoring |
| Security | WPA2 |
| Operating Range | Up to 100 feet (depending on environment) |
Lists the components used for Rinnai's on-demand recirculation system.
Details Rinnai tankless water heaters that include Circ-Logic technology.
Explains the operational process of the on-demand recirculation system.
Describes recirculation setups using a dedicated return pipe.
Explains recirculation methods using a crossover valve.
Instructions for physically installing the recirculation module.
Guide to connecting the module and configuring initial settings.
Detailed installation and configuration for SENSEI™ model water heaters.
Detailed installation and configuration for Non-SENSEI™ model water heaters.
Advice and guidelines for installing the push button accessory.
Instructions for mounting the module directly onto the water heater.
Detailed steps for mounting the module onto a wall surface.
Configuration settings for high altitude installation locations.
Settings related to the 'Service Soon' indicator or maintenance reminders.
Recirculation configuration steps for SENSEI™ model water heaters.
Recirculation configuration steps for Non-SENSEI™ model water heaters.
To Next Page
