Rinnai Control-R Series - User Manual

1 TB-142
2/2018
Technical Bullen 142 - Control-R™ Recirculaon Accessory Pairing
The purpose of this technical bulleng is to communicate an update to the pairing instrucons for all Control-R™ recirculaon
accessories. Updates include the following:
• Ensuring the module LED has been red for at least one minute prior to beginning the pairing process.
• Aer all devices have been paired, use a pin or small tool to press the “Reset” buon on the module in order to reset the
module. Wait one minute aer reboot has occurred and LED is red before aempng to iniate recirculaon with the Wi-Fi
accessory.
Push Buon Moon Sensor Temperature Sensor
Part Number
RWMPB01
Part Number
RWMMS01
Part Number
RWMTS01
If you have support quesons, please call Customer Care and have your Control-R™ module’s
AYLA ID and Water Heater Serial Number available.

Summary

Control-R Recirculation Accessory Pairing

Installation Requirements for Push Button

Specifies necessary components and location considerations before installing the Push Button accessory.

Pairing and Installing the Push Button

Detailed steps for physically mounting the Push Button and pairing it with the Control-R Module.

Operating the Push Button Recirculation

Instructions on how to use the Push Button to activate the water heater recirculation system.

Restoring Push Button Factory Settings

Procedure to reset the Push Button to its default factory configuration.

Rinnai Control-R Series Specifications