Rinnai Control-R User Manual

Recirculaon with On-Demand Accessories User Guide
32
Check out the latest ps and tricks for a successful, stress-free
installaon.
• Addional wiring can run up to 300 feet (91 m) away from
water heater (18-22 gauge wire required).
• Running cold water through the recirculaon line will not force
the pump to turn on.
• The OFF cycles for Circ-Logic are determined by conguraon
sengs of the water heater PC Board. For maximum usage of
the on-demand accessories, the water heater must be set to
Comfort mode. Comfort mode cycles the pump more
frequently ensuring the loop temperature remains higher.
• Power cycling or factory reseng the module will not reset
Circ-Logic.
• For best results and maintaining hot water in the loop, all lines
should be insulated.
Push Buon Installaon Tips:
• The maximum distance from the module to a push buon is
250 . (76 m).
• The push buon requires two CR2450 watch baeries
(available at most retail stores including Walmart, Home
Depot, etc.). Baery life is up to two years.

Rinnai Control-R Specifications

General

Connectivity	Wi-Fi
Wireless Standard	IEEE 802.11 b/g/n
Frequency Band	2.4 GHz
Compatibility	Rinnai tankless water heaters
Functionality	Remote control and monitoring
Security	WPA2
Operating Range	Up to 100 feet (depending on environment)