Need help?Do you have a question about the Rinnai Enduro SP200B and is the answer not in the manual?
General| Brand | Rinnai |
|---|---|
| Model | Enduro SP200B |
| Category | Water Heater |
| Language | English |
General safety guidelines, installation compliance, and consumer advice.
Specific advice for Victorian consumers regarding licensed installers and compliance certificates.
Information on who is at risk and how to prevent scalds.
Recommendations for safe bathing and installing temperature-limiting devices.
Warnings against tampering with or removing safety devices like PTR and ECV valves.
Details on PTR valve function, normal operation, and troubleshooting common issues.
Information on the ECV's role, normal discharge, and troubleshooting leaks.
Precautions for vitreous enamel cylinders regarding hydrogen gas formation and dissipation.
Guidelines on acceptable water temperatures and quality for system operation.
Instructions for draining, filling, regular maintenance, and recommended servicing intervals.
Compliance with standards, manual handling, and working at heights.
Guidelines for accessible component placement and roof selection for collectors.
Specifics for high-rise installations and water pipe material requirements.
Guidance on pipe sizing, pressure limits, and water quality checks.
Regulations and requirements for safe hot water delivery temperatures.
Cylinder mounting, ingress protection, and essential valves.
Instructions for positioning and installing solar collectors and storage cylinders.
Steps for connecting PTR valves, flow/return pipes, and other essential pipework.
Guidance on correctly mounting and connecting the solar controller.
Procedures for connecting sensors, filling the system, and setting pump speed.
Steps for checking for leaks and powering up the solar controller.
Ensuring correct temperature settings and compliance with regulations.
OH&S considerations and warnings specific to collector handling and roof work.
Detailed specifications including model, dimensions, waterways, and frost protection.
Optimal facing direction and tilt angle recommendations based on latitude.
Tables for determining correct pipe sizes and pump speeds for collector arrays.
Details of rails, straps, bolts, washers, and nuts for secure mounting.
Information on barrel unions, caps, other unions, and insulation tape for pipework.
Step-by-step instructions for joining rails and attaching brackets for collectors.
Specific instructions for installations over 10 metres using high-rise kits.
Securing collector mounting straps under roof tiles to the rafters.
Steps for positioning collectors, using compression fittings, and securing with retainers.
Instructions for drilling, sealing, and bolting rails to roof purlins.
Steps for positioning collectors, securing with clamping brackets, and alternative rail mounting.
Instructions for assembling the frame and fastening mounting rails.
Steps for joining collectors and fastening them to the frame.
Diagram detailing spacing and footprint for a two-collector array.
Diagram detailing spacing and footprint for a three-collector array.
Diagram illustrating the 'first in last out' approach for efficient flow.
Diagrams showing details of caps, unions, and sensor leads for connection.
Warning and instructions on using two spanners to prevent collector damage.
Step-by-step guide with diagrams for connecting barrel unions to collector headers.
Comparison of PTR valve settings, pressure ratings, and ECV settings.
Listing of PTR valves, adaptors, nipples, and nuts provided with each cylinder type.
Table and diagram showing physical dimensions of glass-lined cylinders.
Table and diagram showing physical dimensions of stainless steel cylinders.
Lists parts for various controller kits including sensors and pump assemblies.
Details of adaptors, unions, nipples, and included manuals for controller kits.
Explanation of pump control for solar collection and frost protection modes.
Diagrams showing sensor placement and a table of resistance values for verification.
Diagram illustrating the plumbing and connections for a manifold pack system.
Diagram showing the plumbing and connections for a Demand Duo system.
Diagram illustrating the setup for Demand Duo with an added warm water valve.
Steps to identify problems with booster heating and gas supply.
Guidance for issues like no water from taps, frequent booster cycling, and flow fluctuations.
Advice on addressing water hammer and other plumbing related issues.
Contact information, service network overview, and recommended service intervals.
Statement regarding Rinnai's policy on specifications and design changes.
To Next Page
