This system shall be installed in accordance with:
• Manufacturer’s Installation Instructions
• Current AS/NZS 3500
• All applicable local rules and regulations including local OH&S requirements
This system must be installed, commissioned and serviced by an Authorised Person.
Not suitable as a pool or spa heater.
The solar hot and solar cold pipes between the solar storage tank and the
solar collectors must be suited to the high water temperatures and pressures
that may occur. As such, plastic pipe must not be used.
Components used to join pipes must use metallic materials to achieve sealing.
Issue
4
Installation Manual
Rinnai Split Solar Hot Water Systems -
Enduro SP200B, Enduro XL SP250B
and Excelsior SP200BEX
Flat Plate Collectors
IMPORTANT
AS/NZS 2712
SMK.1849
SAI Global
To Next Page
Need help?
General
