Rinnai MC-100V User Manual

MC-100V & BC-100V
Operation & Installation Manual
Your guide on how to use and install Rinnai Deluxe Water Controllers
This guide is for the use and installation of Rinnai Deluxe remote controller models MC-100V
and BC-100V.
These instructions MUST BE used in conjunction with the Rinnai Water Heater Operation /
Installation Manual supplied with Rinnai water heaters.
These remote controllers are compatible ONLY with the Rinnai water heater and other remote
controller models shown.
Refer to page 6 of this manual to conrm the maximum number and combination of control-
lers that can be tted to your Rinnai water heater model.
This appliance must be installed in accordance with:
• Manufacturer’s Installation Instructions
• Current AS/NZS 3000, AS/NZS 3500 & AS/NZS 5601
• Local Regulations and Municipal Building
Codes including local OH&S requirements
This appliance must be installed, maintained
and removed by an Authorised Person.
For continued safety of this appliance it must
be installed and maintained in accordance with
the manufacturer’s instructions.

Rinnai MC-100V Specifications

General

Brand	Rinnai
Model	MC-100V
Category	Controller
Language	English

Summary

Warnings and Safety Information

Regulatory Compliance

Installation must follow local codes, OH&S, and Rinnai guidelines for safety and performance.

Hot Water Scalding Hazards

Warns about scalding risks from hot water, especially for vulnerable users, and advises testing temperature.

Water Temperature Control

Temperature Adjustment

Controller Operation - MC-100V

Controller Operation - BC-100V

Basic Operation

Controller Operation - Shower Saver/Bath Fill

Safety Reminder

Crucial instruction to always check water temperature before use and never leave children unattended.

Smartstart Pre-Heat System

Preheat Operation

Detailed procedure for activating and using the Smartstart pre-heat function for warmed pipes.

Water Controller Installation - General

Installation Guidelines

Master/Sub Controller Roles

Water Controller Installation - Location

Installation Location Advice

Water Controller Installation - Cabling

Communication Cable Connection

Instructions for connecting communication cables, including preparing terminals and using the 'Ezi connect' port.

Water Controller Installation - Mounting

MC-100V Mounting Procedure

BC-100V Mounting Procedure