To Next PageTo Next Page
Need help?Do you have a question about the Rinnai RC80E and is the answer not in the manual?
General| Brand | Rinnai |
|---|---|
| Model | RC80E |
| Category | Water Heater |
| Language | English |
Identifies indoor and outdoor models for Rinnai tankless water heaters.
Covers critical safety warnings and procedures for gas leaks.
Details on capacity, consumption, temperature, electrical, and gas connections.
Explains safety alerts, recommended behaviors, and built-in safety features.
Describes how the tankless water heater functions.
Overview of features available on different temperature controller models.
Diagram illustrating the controls and indicators on the MC-91/MCC-91 controller.
Step-by-step guide to setting the desired water temperature.
Lists temperature settings available for different water heater models.
Details on resetting maximum temperature and controller configurations.
Instructions for adjusting the volume of voice prompts on controllers.
Explains the bath fill function and its temperature limitations.
Steps to set water volume and start the bath filling process.
Detailed steps for filling a tub and important notices.
Instructions for muting controller beeps and setting the clock.
Covers cleaning, vent/air inspection, flame check, and scale prevention.
Lists common error codes, their faults, and suggested remedies.
Details further error codes, their faults, and remedies.
Addresses common problems like no hot water or cold water.
Provides maximum acceptable levels for various water quality parameters.
Step-by-step guide for flushing the heat exchanger to resolve scale build-up.
Outlines installer qualifications and general installation guidelines.
Specifies required clearances around the water heater unit.
Provides instructions for securely attaching the water heater to the wall.
Details electrical hookup and air handler control switch setup.
Covers gas valve, type, pressure, and leak testing requirements.
Explains how to size gas pipes and provides natural/propane gas tables.
Instructions for installing isolation and pressure relief valves.
General water piping rules and pressure relief valve requirements.
Details on electrical heating, solenoid valves, and wind-chill effects.
Step-by-step guide for manually draining the water heater.
Methods to prevent freezing and actions if pipes freeze.
Illustrates basic piping connections and lists required equipment.
Shows piping for circulation systems and provides application guidelines.
Rules for direct vent intake and exhaust systems.
Instructions for managing condensate trap and drain line.
Determines maximum vent length based on elbows and switch settings.
Lists tested vent products and manufacturer contact information.
Specifies clearances for flue terminals in Canadian and US installations.
Specific clearance rules for vent termination locations for RC80i/RC98i.
Specific clearance rules for vent termination locations for RC80e/RC98e.
Guidelines for horizontal and vertical flue termination.
Details on EZConnect and MSA packs for linking heaters.
Switch settings for adjusting the appliance for high altitudes.
Procedure for setting DIP switches for high altitude operation.
Guidance on controller placement and configuration options.
Details on cable gauge and maximum length for controller wiring.
Instructions for physically mounting and wiring the temperature controller.
Essential safety checks and gas smell procedures before operating.
Step-by-step guide for starting and shutting down the water heater.
Graphs illustrating pressure drop and outlet flow rates.
Rules for space heating use, pumps, and iron components.
Diagrams and tables showing physical dimensions of the unit.
Explanation of the unit's electrical schematic diagram.
Specific regulations for carbon monoxide detectors in Massachusetts.
Details on warranty coverage periods and information to record.
Covers warranty service, exclusions, and legal limitations.
Lists other Rinnai products like furnaces, fireplaces, and boilers.
