Rinnai RC80I User Manual

30 Manual - Rinnai Condensing Water Heaters
Flue Installation (RC80i, RC98i)
Secure the first vent component to the water heater
with one self-tapping screw at the hole located above
the condensate collector.
Securing
Horizontal Termination
Vertical Termination
Slope the venting toward the appliance according to
the vent manufacturers installation instructions.
Dispose of condensate per local codes.
Slope the venting toward the appliance according to
the vent manufacturers installation instructions.
Dispose of condensate per local codes.

Rinnai RC80I Specifications

General

Type	Tankless
Heating Capacity	8.0 GPM
Energy Factor	0.82
Maximum BTU Input	199, 000 BTU/h
Minimum BTU Input	15, 000 BTU/h
Maximum Flow Rate	8.0 GPM
Input BTU/h	199, 000 BTU/h
Fuel Type	Natural Gas
Warranty	5 years parts
Activation Flow Rate	0.4 GPM
Temperature Range	98°F to 140°F
Vent Material	PVC/CPVC
Gas Connection	3/4 inch
Water Connection	3/4 inch NPT
Electrical Requirements	120V, 60Hz