12
Rinnai Corporation
V3237 Models
DELUXE CONTROLLER
ABOUT THE DELUXE CONTROLLER (MC-100V-1US)
ABOUT THE DELUXE BATHROOM CONTROLLER (BC-100V-1US)
DELUXE BATHROOM CONTROLLER
With power interruption, water heater will automatically default to the ON position to
provide hot water.
Digital Display
Indicates the selected water
temperature. Error messages flash
in the event of a failure.
ON/OFF
Used to switch the water heater on
and off.
Priority
Pressing takes control of the water
temperature by this controller only
when all taps are o
ff.
Function
Enables the user to set the clock
and sound volume functions.
Thermostat
Increases or decreases the desired
water temperature.
In Use Indicator
Indicates that the hot water heater is
in operation.
Water Temperature Indicator
Indicates the selected hot water
temperature.
Clock
12 Hour AM / PM clock. In the event
of a fault, codes for error messages
will flash here.
Call
Allows user to contact another
controlle
r. Can be used as a
communication channel for errands
or in emergency situations.
In Use Indicator
Indicates that the hot water heater is in operation.
Priority
Pressing takes control of the water
temperature by this controller only
when all taps are o
ff.
Call
Allows user to contact another
controlle
r. Can be used as a
communication channel for errands
or in emergency situations.
Clock
12 Hour AM / PM clock. In the event
of a fault, codes for error messages
will flash here.
Thermostat
Increases or decreases the desired
water temperature.
Sound Volume
Used to select the voice prompt
volume.
Water Smart / Bath Fill Indicator
Used to select
Water Smart / Bath Fill Function.
ON/OFF
Used to switch the water heater on
and o
ff.
Water Smart / Bath Fill
Used to select Water Smart / Bath
Fill Function.
Power Save
Indicates that the remote is in the
energy saving mode.
Water Volume
Used to select Water Smart / Bath
Fill volumes.
U273-430(00).indd 12 06.2.8 10:36:45 AM
To Next Page
Loading...
Need help?
General
