To Next PageTo Next Page
Need help?Do you have a question about the Rinnai RU98e and is the answer not in the manual?
General| Brand | Rinnai |
|---|---|
| Model | RU98e |
| Category | Water Heater |
| Language | English |
Explains safety symbols like DANGER, WARNING, CAUTION.
Crucial warnings for safe operation, maintenance, and potential hazards.
Details required skills for licensed professionals.
Covers DO NOTs and MUST DOs for proper installation.
Specifies installation types for residential and commercial applications.
Lists all items required before commencing installation.
Discusses factors like corrosive air and ventilation for placement.
Explains how water quality affects the heat exchanger and warranty.
Specifies minimum distances for vent terminals from various building features.
Specifies minimum distances for outdoor vent terminals.
Details specific restrictions and recommendations for vent termination placement.
Provides specific clearance dimensions for unit placement.
Guidance on protecting the unit from freezing temperatures.
Tables and instructions for determining maximum vent lengths based on elbows.
Instructions for securing the unit to the wall and removing the front panel.
Lists certified vent system manufacturers and their products.
Rules for correct vent system installation and prohibited materials.
Diagrams and instructions for installing concentric flue terminations.
Visual guide for Centrotherm venting termination configurations.
Details on using the specific adaptor for PVC/CPVC vent systems.
Critical safety information for vent and air intake piping.
Specifies approved materials for PVC/CPVC vent and air intake piping.
Provides a sheet to calculate total system equivalent vent lengths.
Tables showing maximum vent lengths for natural gas units with 4" twin pipe.
Tables for propane units showing vent lengths for 3" and 4" twin pipe.
Step-by-step guide for installing the Ubbink adaptor.
Lists necessary components for 3" and 4" PVC/CPVC vent assembly.
Describes the three available PVC/CPVC vent termination types.
General guidelines for installing vent terminations.
Specific instructions for installing the IPEX Concentric Vent Kit.
Specifies acceptable clearance distances for IPEX CVK terminations.
Step-by-step process for installing approved PVC/CPVC vent configurations.
Details on how to install the IPEX Low Profile termination kits.
Guidelines for locating and installing sidewall vent terminations.
Instructions for roof penetrations with multiple water heaters.
Steps for properly cementing vent pipe joints.
Details and physical data for the Ubbink adaptor.
Identifies acceptable and unacceptable elbow types for venting systems.
Lists certified components and their equivalent lengths for vent systems.
Checklist to ensure proper venting and condensate handling.
Specifications and requirements for installing the pressure relief valve.
Recommendation for installing isolation valves for maintenance.
Step-by-step guide for installing isolation valves.
Detailed steps for installing the pressure relief valve.
Explanation of symbols used in the basic piping diagram.
Ensures all plumbing connections are correctly made and checked.
Safety precautions and steps for gas supply installation.
Tables to determine correct gas pipe size based on length and gas type.
Electrical connection safety and requirements.
Instructions for setting DIP switches based on installation altitude.
Guidelines for choosing controller placement and cable specifications.
Information on connecting multiple temperature controllers.
Detailed instructions for physically installing the temperature controller.
Key technical specifications for different Rinnai models.
Provides physical dimensions and port locations for all models.
Charts showing water flow and pressure loss characteristics.
Diagram illustrating the electrical system of the water heater.
Details for installing and configuring a recirculation pump.
Instructions for setting DIP switches for Economy and Comfort modes.
Explains the operational sequence and modes for recirculation.
Key safety and operational information for the user.
Critical safety advice and steps before using the water heater.
Step-by-step guide for starting and operating the water heater.
Procedure for safely shutting off the gas supply.
Explains the MC-91-2 controller, its functions, and safety warnings.
Step-by-step guide on adjusting the water temperature setting.
Lists available temperature ranges with and without controllers.
Details on alternative temperature settings and controller compatibility.
How to access and view diagnostic codes and system status.
Instructions for cleaning the appliance's internal and external parts.
Steps for cleaning the water inlet filter.
Steps for preparing the unit for winter to prevent freezing and damage.
Detailed instructions for flushing the heat exchanger to remove scale.
Instructions for manually draining the unit and returning it to service.
Method to prevent freezing when water flow is minimal.
Regulations regarding carbon monoxide detectors and signage in MA.
Identifies replacement parts with corresponding technical sheet item numbers.
Information on how to register for extended warranty coverage.
Details warranty conditions for residential and commercial applications.
Outlines what is covered by the warranty and for how long.
Explains Rinnai's process for repairs or replacements.
Describes the necessary skills and certifications for installers.
Key DO NOTs and MUST DOs for proper installation.
Specifies installation types for residential and commercial applications.
Lists all necessary items for installation preparation.
Guidance on assessing water quality and its impact on the unit.
Factors related to the installation environment and potential corrosive compounds.
Specific guidelines for placement based on unit type and environment.
Specifies clearances for chimney terminations in Canada and USA.
Details on avoiding problematic vent termination locations.
Specific clearance measurements for unit placement.
Tables showing maximum vent lengths based on elbows for different gas types.
Tips to protect the unit from freezing.
Steps for securely mounting the water heater to the wall.
Instructions on how to remove the front panel.
Directives for installing air intake systems according to vent manufacturers.
Checklist to ensure proper venting and condensate handling.
Standards and requirements for installing the safety valve.
Importance of installing isolation valves for maintenance.
Step-by-step guide for installing isolation and pressure relief valves.
Explanation of symbols used in the basic piping diagram.
Ensures all plumbing connections are correctly made and checked.
Safety precautions and steps for gas supply installation.
Tables to determine correct gas pipe size based on length and gas type.
Electrical connection safety and requirements.
Instructions for setting DIP switches based on installation altitude.
Guidelines for choosing controller placement and cable specifications.
Steps for mounting the temperature controller.
Diagram illustrating the electrical system of the water heater.
Key safety and operational information for the user.
Critical safety advice and steps before using the water heater.
Step-by-step guide for starting and operating the unit.
Procedure for safely shutting off the gas supply.
Explains the MC-91-2 controller, its functions, and safety warnings.
Information on setting temperatures without a remote controller.
Step-by-step guide on adjusting the water temperature setting.
Lists available temperature ranges with and without controllers.
Details on alternative temperature settings and controller compatibility.
How to access and view diagnostic codes and system status.
Instructions for cleaning the appliance's internal and external parts.
Steps for cleaning the water inlet filter.
Steps for preparing the unit for winter to prevent freezing and damage.
Detailed instructions for flushing the heat exchanger to remove scale.
Instructions for manually draining the unit and returning it to service.
Method to prevent freezing when water flow is minimal.
Regulations regarding carbon monoxide detectors and signage in MA.
Identifies replacement parts with corresponding technical sheet item numbers.
Information on how to register for extended warranty coverage.
Details warranty conditions for residential and commercial applications.
Outlines what is covered by the warranty and for how long.
Explains Rinnai's process for repairs or replacements.
