Need help?Do you have a question about the Rinnai Sensei RU199e and is the answer not in the manual?
General| Type | Tankless |
|---|---|
| Fuel Type | Natural Gas or Propane |
| Maximum Flow Rate | 9.8 GPM |
| Electrical Requirements | 120V, 60Hz |
| Maximum BTU Input | 199, 000 BTU/hr |
| Minimum BTU Input | 15, 000 BTU/hr |
| Activation Flow Rate | 0.4 GPM |
| Temperature Range | 98°F to 140°F |
| Temperature Range with MCC-91 controller | 98°F - 185°F |
| Venting | Direct Vent |
| Vent Material | PVC/CPVC |
| Warranty | 5 years parts |
Explains safety alert symbols like WARNING, DANGER, and CAUTION for hazard identification.
Details the procedure for replacing the gas orifice during the conversion.
Guides on adjusting appliance settings via the PC board after orifice replacement.
Verifies proper functioning and flame behavior of the appliance post-conversion.
Provides essential instructions for operating the appliance after gas conversion.
To Next Page
