EasyManua.ls Logo

Rinstrum C530 Work Instruction

Rinstrum C530
4 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
WORK INSTRUCTION M500-605-100-M01 Rev 1.00
Page 1 M500-605-100-M01
Sealing Methods C510, C520 and C527
Sealing with calibration seal stickers
Equipment required.
• Destructible stickers
• Setup switch cover
• Load cell connection cover (M5010)
Method
1. Place the setup switch cover in position so that it covers the setup switch and 2
closure screws.
2. Place a sticker over the centre of the setup switch cover and onto the side of the
enclosure as shown in Figure 1.

Other manuals for Rinstrum C530

Questions and Answers:

Rinstrum C530 Specifications

General IconGeneral
Display TypeTFT LCD
Resolution800 x 480 pixels
ConnectivityEthernet, USB
Power12-24 VDC
Ingress ProtectionIP65
Power Supply12-24 VDC
Display Size7 inch
Operating SystemLinux
Operating Temperature0°C to 50°C
Communication InterfacesEthernet, USB, RS232

Related product manuals