Rinstrum C530 Work Instruction

WORK INSTRUCTION M500-605-100-M01 Rev 1.00
Page 1 M500-605-100-M01
Sealing Methods – C510, C520 and C527
Sealing with calibration seal stickers
Equipment required.
• Destructible stickers
• Setup switch cover
• Load cell connection cover (M5010)
Method
1. Place the setup switch cover in position so that it covers the setup switch and 2
closure screws.
2. Place a sticker over the centre of the setup switch cover and onto the side of the
enclosure as shown in Figure 1.

Rinstrum C530 Specifications

General

Brand	Rinstrum
Model	C530
Category	Touch Panel
Language	English