Rinstrum R320 Quick Start Manual

Rinstrum - R300 Series Digital Indicator Quick Start Manual Rev 1.5
Page 16
6.6. Regulatory Sealing Requirements
To comply with regulatory sealing requirements for each
instrument, (ie. to ensure instruments are not accidentally or
deliberately tampered with), it is important that proper sealing
procedures be adhered to.
6.6.1. R310 and R320 Sealing (R320 shown)
For the R310 and R320, affix sealing stickers to the rear of the
instrument, over one or more screws in the locations indicated.
Also affix a sealing sticker over the load cell cable where the
cable-tie strain relief is attached, as indicated.
Affix stickers in the locations indicated.

Rinstrum R320 Specifications

General

Category	Accessories
Excitation Voltage	5 VDC
Type	Indicator
Display	20 mm high
Power	12-24 V DC
Operating Temperature	-10°C to +50°C
Load Cell Connection	4-wire
Communication Ports	RS-232, RS-485