Rio Intense Pulsed Light - Procedure for Changing the Cartridge; Steps for Cartridge Removal and Insertion

24
STEP 1
Turn the unit off and back
on, and enter security
code.
STEP 2
Press and hold the (-)
and (+) buttons together
while the unit is self-
checking. Power levels 1
and 5 will illuminate.
STEP 3
Pull the treatment cartridge
(which contains the bulb)
away from the wand.
The unit will automatically
power off.
STEP 4
Ensure the connecting
pins line up with the holes
in the wand and push the
new treatment cartridge
fully into place.
The unit will automatically
power on.
Power levels 1 and 5 will
illuminate again.
CHANGING THE TREATMENT CARTRIDGE
3
4
2
1