EasyManua.ls Logo

Rio LAHR2-C - User Manual

Rio LAHR2-C
4 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
SALON CELEBRITY
LASER HAIR REMOVER
LAHR2-C
instructions
WARNINGS
Read all instructions thoroughly and
retain for future reference.
This appliance can be used by children aged
8 years and above and persons with reduced
physical, sensory or mental capabilities or lack of
experience and knowledge if they have been given
supervision or instruction concerning the use of
the appliance in a safe way and understand the
hazards involved. Children shall not play with the
appliance. Cleaning and maintenance shall not be
made by children without supervision.
Not suitable for Afro-Caribbean or black skin
complexions. Not suitable for Grey Hair.
Laser hair removal should not cause discomfort.
If you feel any discomfort or soreness the setting
may be too high or your skin tone (colour) is not
suitable for use with this product.
Power levels should be selected based on your skin
type as defined in the ‘Fitzpatrick Skin Phototypes’
section.
Do NOT treat the following areas: Tattoos, permanent
make-up, pimples, warts, hair grown on black spots,
skin disease, birth marks, burns, lips, nipples,
genital or anal areas, eczema, eyelashes, eyebrows,
near the eyes, nasal or ear hair.
• Do NOT treat the same hair/area repeatedly in any
one session.
Inbuilt safety features protect the eye being exposed
to the laser, however, never aim the Wand at or near
eyes.
Do NOT use after drinking alcohol or if you are
feeling unwell or fatigued.
Do NOT use near flammable materials.
Reflection Hazard: Please remove all jewellery in
vicinity of the treatment area before use.
When not in use, store the key responsibly in a safe
place away from children.
Misuse of the unit can cause harm.
Do NOT override any safety features or open the
unit.
© The Dezac Group Ltd 2014
© The Dezac Group Ltd 2014
© The Dezac Group Ltd 2014
Question and Answer IconNeed help?

Do you have a question about the Rio LAHR2-C and is the answer not in the manual?

Summary

General Safety Warnings

Read All Instructions

Read all instructions thoroughly and retain for future reference before using the appliance.

Appliance Usage by Minors and Incapacitated Persons

Appliance can be used by children aged 8+ and persons with reduced capabilities with supervision.

Skin Tone and Hair Type Suitability

Not suitable for Afro-Caribbean or black skin complexions, or Grey Hair.

Discomfort and Skin Tone Adjustment

Laser hair removal should not cause discomfort; adjust setting for skin tone if needed.

Power Level Selection

Power levels should be selected based on your skin type as defined in the 'Fitzpatrick Skin Phototypes' section.

Areas to Avoid Treatment

Do NOT treat areas with tattoos, birth marks, lips, nipples, genitals, or near eyes.

Treatment Repetition Caution

Do NOT treat the same hair/area repeatedly in one session.

Eye Safety and Wand Aiming

Inbuilt safety features protect eyes; never aim the Wand at or near eyes.

Usage with Alcohol and Fatigue

Do NOT use after drinking alcohol or if feeling unwell or fatigued.

Flammable Materials and Jewellery

Do NOT use near flammable materials; remove jewellery before treatment.

Storage and Misuse Prevention

Store key responsibly away from children; misuse can cause harm.

Safety Feature Integrity

Do NOT override any safety features or open the unit.

Cautions and Specifications

Product Repair and Service

Do NOT dismantle or repair. Contact Customer Care for any product problems.

Unit and Wand Integrity

Do NOT override safety features or open the unit or wand.

Approved Adapter Usage

Only use this product with the Mains Adapter supplied.

Product Usage Responsibility

This product must be used responsibly.

Instruction Manual References

Refer to your User Manual for warnings, sequences, laser operation, skin types, patch test, and troubleshooting.

Laser Wavelength and Safety Features

Features an 808nm wavelength and inbuilt safety features, making goggles unnecessary.

Treatment Preparation and Steps

Pre-Treatment Hair Preparation

Best results achieved on hairs shaved a day or two before, or trimmed to 1mm-2mm.

Jewellery Removal

Remove all jewellery in the vicinity of the treatment area before treatment.

Patch Test Confirmation

Ensure you have patch tested the area to be treated 24 hours prior to treatment.

Step 1: Power Connection

Plug the Mains Adapter into the Unit socket and then into the Mains.

Step 2: Unlock Keyswitch

Use the Key to unlock the Keyswitch; the left Power Level light will flash green.

Step 3: Security Key Press Sequence

Enter the 'SECURITY KEY PRESS SEQUENCE' within 60 seconds as found in the User Manual.

Step 4: Set Power Level

Use +/- buttons to set power level based on skin type; reduce if discomfort occurs.

Step 5: Enable Treatment

Press the Enable Button; the red Enable light stays on, and the amber light on the Wand illuminates.

Step 6: Ready for Treatment

When placed on skin, the amber light goes OFF, and the white 'ready' light illuminates.

Step 7: Start Laser Treatment

Press and HOLD the Laser Button to start; a series of high pitch beeps indicate operation.

Step 8: Move to Next Hair

When laser light ceases, the amber light returns; move onto the next hair.

Step 9: Lock Unit and Store Key

Turn the Keyswitch to lock the unit and remove the Key to a safe place.

Product Components Overview

Component Identification

Identifies key components including Mains Adapter, Keys, Keyswitch, Power Level lights, Enable Button, and Hand-held Wand.

Rio LAHR2-C Specifications

General IconGeneral
BrandRio
ModelLAHR2-C
CategoryHair Removal System
LanguageEnglish

Related product manuals