Note 1: When using chemicals, always follow the
instructions provided on the manufacturer’s labels.
Note 2: Use an accurate test kit to perform all chemistry tests.
Note 3: Never mix chemicals.
Note 4: Always add chemicals directly to the spa water,
evenly spreading the chemicals over the surface. Run
the Filter Pump for 15 or more minutes after applying any
chemical. To help with the mixing of chemicals you can
turn on your massage system as well.
Note: Trichlor chlorine tablets and/or non-dichlor
granular chlorines must not be used in your spa , they
may damage the spa , voiding your warranty.
MAINTENANCE
Note: Never use muriatic or hydrochloric acid to adjust
pH as it can damage your spa shell and surroundings.
To Next Page
Loading...