Need help?Do you have a question about the Risco GT 600 and is the answer not in the manual?
General| Brand | Risco |
|---|---|
| Model | GT 600 |
| Category | Control Panel |
| Language | English |
Provides an overview of the GT 600/601 control panel capabilities and features.
Explains the different levels of access and functionality for user codes.
Details code levels that affect the entire system's operation and access.
Describes code levels that provide control over specific areas within the system.
Explains code levels for controlling groups of areas, offering greater flexibility.
Details code levels used to operate pre-programmed outputs on the system.
Step-by-step guide to arming the security system.
Details the pre-exit check process to ensure all zones are ready before setting the system.
Instructions for setting and unsetting the system using normal and biased keyswitches.
Procedure for disarming the security system.
Guide for partially arming specific zones or areas of the system.
A shortcut method for partially arming the system.
Instructions on how to remove individual zones from the system.
Guide to setting specific areas using Master/Global Main or Area codes.
Procedure for testing all system components and functions.
How to access and interpret the system's event log.
Instructions for enabling or disabling chime notifications.
Guide to adding, modifying, or removing user codes from the system.
Steps to set the system's internal clock and date.
Information on the Vo-Comm feature for remote status notification.
Details on how the Vo-Comm operates and how to receive calls.
Explains the types of status and alarm messages sent by Vo-Comm.
Guide for users to initiate remote system examination by the installation company.
Procedure for clearing alarms and faults from the system display.
Steps to reset the system after an alarm or fault has been cleared.
How to set user levels required for engineer access to the system.
Details on how an engineer uses their authorisation code to access the system.
Information on system behaviour during power outages and battery backup.
Procedure for setting the system during a temporary mains power failure.
How to reset the system display after a mains power failure event.
Procedure for setting the system when a line fault is detected.
How to use G-Tags for setting and unsetting the system.
Programming codes to control outputs and system functions.
Using group codes for flexible setting/unsetting of multiple areas.
Steps to program user codes with specific group area control permissions.
Procedure for unsetting specific areas using group master or main codes.
How to add more areas to a system already set with group codes.
How display blanking affects system status indication.
Information regarding user training responsibilities.
Importance of regular testing and servicing by qualified engineers.
Details on keypad alert keys and tamper detection mechanisms.
Explanation of system tamper alarms and their reset procedures.
Table for recording system zone attributes like type, descriptor, and areas.
Chart to record programmed user names and their usage status.
To Next Page
