Risco GT Plus - User Manual

The RISCO GT Plus is a comprehensive security system designed for both "Away" (Full Set) and "Home" (Partial Set) settings, offering various modes of operation including quick mode and high security mode with code or proximity tag authentication. It supports multiple partitions and group settings, allowing for flexible security management of different areas within a property. The system also includes functionalities for unsetting, omitting/un-omitting zones, viewing system faults, checking last alarms/event logs, viewing system status, activating outputs, and triggering panic, fire, and auxiliary emergency alarms. Remote control and SMS commands are supported for enhanced accessibility and control. The system can be integrated with the RISCO Cloud and a dedicated smartphone app for remote monitoring and management.

Important Technical Specifications (Inferred):

Partitions: Supports up to 3 partitions for flexible area management.
User Codes: Supports 4-6 digit user codes.
Authentication: Code entry, proximity tag, and installer-defined rounded button for various operations.
Remote Control: 2-way remote control with LED indicators for status (Green for Full Set/Unset/Alarm, Red for Full Set, Orange for Partial Set, Flashing LED for Alarm, Orange for low battery).
SMS Commands: Supports various SMS commands for setting, unsetting, status checks, zone management, FM number changes, output activation/deactivation, and SIM credit level.
Connectivity: RISCO Cloud integration, smartphone app (Apple App Store, Android Play Store).
Keypad: Elegant Keypad with LED indicators for Power, Ready, Tamper, Set, and Fire status.

Usage Features:

Setting the System (Full Set - "Away"):

Quick Mode: A simplified method for arming the system.
High Security Mode: Requires a code or proximity tag for arming.
Full Set All: Arm all partitions by selecting "Security" and pressing the designated button.
Partition-Specific Arming: Slide a specific partition to the right on the interface to arm it individually.

Setting the System (Partial Set - "Home"):

Quick Mode: A simplified method for partially arming the system.
High Security Mode: Requires a code or proximity tag for partial arming.
Partial Set All: Partially arm all partitions by selecting "Security" and pressing the designated button.
Partition-Specific Arming: Slide a specific partition to the left on the interface to partially arm it individually.

Partition & Group Setting:

Full Partition Setting: Access via "Security" menu > "Partitions" tab, then select "All" or specific partition numbers using a code.
Partial Partition Setting: Similar to full partition setting, but for partial arming.
Group Setting: Access via "Groups" tab, then press the group letter.
Remote Keypad Setting: Quick mode and High Security mode available for partition setting via remote keypad, using partition numbers, codes, or proximity tags.

System Unsetting:

Code/Proximity Tag: Unset via "Security" menu using a code or proximity tag.
Unset All: Unset all partitions by sliding a specific partition to the center and entering a code, or by pressing "Unset" from the menu.
Remote Keypad Unsetting: Quick mode and High Security mode available for unsetting via remote keypad using a code.
Partition & Group Unsetting: Select partitions to unset via "Security" menu > "Partitions" tab. Specific partition unsetting via code or partition number.

Duress Unsetting:

Enter a duress code. The panel will be silent (no alarm siren), indicating a silent alarm has been sent.

Omiting & Un-Omitting Zones:

Omit: Access via "Security" menu > "Detectors" tab, select a detector (zone), slide the switch to the right, then confirm with code and select omit option.
Un-Omit: Use SMS command UNOM + zone number.

Viewing System Faults:

From the Top Bar, press the designated button to view faults. Navigate through the menu using code.

Viewing Last Alarm / Event Log:

Access via "History" menu, press "All" to view all events, or search for specific events. Filters available for All, Alarms, Faults, Smart Home, Media Events.

Viewing System Status:

Press the designated button for 2 seconds (Quick mode or High Security mode with code/proximity tag).

Activating Output:

Access via "Security" menu > "Utility Output" tab, select relevant output button. Requires code or proximity tag for High Security mode. Must be engineer-defined.

Activating Emergency Alarms:

Panic Alarm: Press the Emergency button (top of Lock Screen or main menu), or designated buttons on remote control.
Fire Alarm: Press the Emergency button (top of Lock Screen or main menu), or designated buttons on remote control.
Auxiliary Emergency Alarm: Press the Emergency button (top of Lock Screen or main menu), or designated buttons on remote control.

SMS Commands:

A wide range of commands for remote control of the system, including setting, unsetting, status checks, zone management, and output control.

LED Indicators (Elegant Keypad):

Power LED: On (Power OK), Off (No power), Rapid flash (System fault), Slow flash (System is programming).
Ready LED: On (Ready to set), Off (Not ready to set), Slow flash (Ready to set while entry/exit zone is open).
Tamper LED: On (Tamper alarm), Off (No tamper alarm).
Set LED: On (System in fully set mode), Off (System unset), Rapid flash (Alarm), Slow flash (System in Exit Delay).
Fire LED: On (Fire alarm), Off (No fire alarm), Flash (Fire circuit fault).

LED Indicators (2-Way Remote Control):

Full Set: Send Green, Receive Red.
Partial Set: Send Green, Receive Orange.
Unset: Send Green, Receive Green.
Alarm: Send Green, Receive Flashing LED.
Orange LED indicates a low battery condition.

Defining User Codes:

Grand master code (default 1234).
Navigate to Codes/Tags, select user, then enter a 4-6 digit code.

Maintenance Features:

Low Battery Indication: The 2-way remote control's LED will change to orange to indicate a low battery condition.
System Fault Indication: The Power LED on the Elegant Keypad will rapid flash to indicate a system fault.
Tamper Alarm Indication: The Tamper LED on the Elegant Keypad will be on if a tamper alarm is active.
Fire Circuit Fault Indication: The Fire LED on the Elegant Keypad will flash if there is a fire circuit fault.
SIM Credit Level Check: An SMS command CR can be used to get the SIM credit level, which is important for maintaining SMS functionality.
RISCO Cloud Integration: Registering and logging into the RISCO Cloud allows for remote monitoring and management, potentially aiding in system maintenance and troubleshooting.
Smartphone App: The iRISCO Smartphone app provides convenient remote access for monitoring and control, which can assist in identifying and addressing system issues.
User Manual Access: The GT Plus User Manual is available on the riscogroup.com website for detailed information and troubleshooting.