Risco GT Plus - Activating System Outputs; Activating Output

09/2020 Page 5 5IN2907
Activating Output
Code 
“Security” menu

“Utiltiy Output”
tab
 select
relevant Utility
Output button,
√
 code,
 scroll to
Activities menu,
 enter
Utility Output
number, .
Note: Must be
engineer-
defined
 Quick mode: Press
button (1—3) for 2
seconds
 High security
mode: Press button
(1—3) for 2 seconds
 code
or use
Proximity tag.
Note: Must be
engineer-defined
 Quick mode: Press button (1—3) for 2 seconds
 High security mode: Press button (1—3) for 2 seconds  enter code.
Note: Must be engineer-defined