Need help?Do you have a question about the Risco lightsys RP432KP and is the answer not in the manual?
Details about the back panel of the main unit, including wiring and DIP switch settings.
Describes the status of the Power indicator light.
Explains the Ready indicator status for arming the system.
Details the Arm (Set) indicator for system arming status.
Describes the Stay/Bypass indicator for partial arming or zone omission.
Explains the Tamper indicator status for device security.
Details the Fire indicator for fire alarm status.
Describes the function of the Red LED for arm/alarm indication.
Explains the function of control keys for system operation and menu navigation.
Describes the function of emergency keys for activating alarms.
Details the function of keys used for arming zones or activating macros.
Explains the use of numeric keys for inputting numbers.
How to adjust the keypad's brightness level.
How to adjust the keypad's display contrast.
Adjusting the audible volume of the keypad's buzzer.
How to select or change the keypad language.
Instructions for using the proximity tag with the keypad.
Details on the automatic keypad software upgrade process.
Key technical data and specifications for the keypad.
Information regarding product models and part numbers.
Information regarding FCC compliance, interference, and warnings.
Declaration of compliance with RTTE Directive 1999/5/EC.
Details on the product's limited warranty terms and conditions.
To Next Page
General
