7
Operation
1
Quick Operation High Security Mode
View Last Alarm
Press button
for two seconds
System Chime
On/Off
Press the button
for 2 seconds
View system
status
Short press on : LCD
display
Long press on
: LCD
display + voice
3
Only LCD Dispaly: Short press
on folllowed by code
or proximity tag.
LCD display + voice: Long
press on
followed by
code or proximity tag
Macro Activation
5
Press
/ / for 2 seconds
Enter programming
mode
Press
and enter the code
Changing Keypad
Language
Press
simultaneously for 2 seconds. Select the
language and press
to confirm.
1 All operations are available while keypad is turned on (Not in Sleep Mode). All operations
are performed by Normal press (with beep), unless otherwise mentioned.
2 Ask your installer for the keys definition
3 In voice supported systems. Not applicable for WiComm Pro
4 Ask your installer whether outputs control is applicable or not and which output is
assigned to which key
5 Ask your installer for the macro defined for each key.
ICONS INDICATION
Key Function
On System is armed in Full Arm or Stay Arm mode
Off System is disarmed
Slow Flash System is in Exit/Entry Delay
Rapid Flash Alarm condition
On System is in Stay Arm mode (Part Set) or Zone Bypass mode
Off No bypass zones in the system
On System is ready to be armed
To Next Page
Loading...
Need help?
General