Need help?Do you have a question about the Risco ProSound RS200WAP000B and is the answer not in the manual?
General| Brand | Risco |
|---|---|
| Model | ProSound RS200WAP000B |
| Category | Marine Equipment |
| Language | English |
Introduces the RISCO Group External Sounder, highlighting its performance and design for alarm installations.
Lists key features such as SLT strobe, vandal-proof housing, auto-recharging battery, and tamper protection.
Details the physical mounting procedure for the sounder, including drilling, wiring, and securing the unit.
Explains the functions of the POWER LED (LED1) and Status LED (LED2) for operation and status feedback.
Describes the configuration options via DIP1 and DIP2 switches for Stand-Alone and BUS modes.
Details wiring connections for PS+, PS-, TAMPER, PROX, TRBL, C+/-, and STB terminals in Stand-Alone mode.
Explains wiring procedures for connecting the sounder in a BUS mode configuration.
Introduces dedicated ProSound software programming options for ProSYS, allowing multiple sounders to be added.
Provides step-by-step instructions on how to add or delete ProSound units from the ProSYS system.
Explains how to configure ProSound parameters via the installer menu and Siren menu options.
Details new system parameters in the installer menu, such as Audible Proximity Tamper and Siren Auxiliary=Tamper.
Explains how to use the user menu for maintenance and performing diagnostics tests on the sounder.
Describes how to access the sounder version menu for part number, software version, date, and checksum.
To Next Page
