Need help?Do you have a question about the Risco WL RWS401 and is the answer not in the manual?
General| Brand | Risco |
|---|---|
| Model | WL RWS401 |
| Category | Marine Equipment |
| Language | English |
Sounder activation duration defined by system's Bell Time Out parameter during alarm conditions.
Panel receives trouble indication for low battery; two types: radio or speaker low battery.
Panel generates fault signal for sounders whose signal is not received within a predefined time.
Sounder produces local alarm if cancellation signal is not received within entry delay time.
Functional self test performed upon battery insertion or reset switch press, indicated by strobe flash.
Two LEDs on PCB indicate transmission (Red), low battery (Yellow), and learning confirmation.
Sounder identifies itself to the system's receiver by writing its ID into the system.
Defines sounder parameters like Strobe Control, Strobe Blink, Volume, Muting Tamper, and Supervision Time.
Performs a communication test between the sounder receiver and the system.
Enables testing of speaker/radio battery voltage, sounder version, and sounder calibration.
Details power supply, battery lifetime, sounder volume, strobe lens, flash frequency, dimensions, and weight.
Specifies wireless technology, frequency, range, monitoring, and modulation type.
Lists temperature range, IP class, and environment class.
Declares compliance with essential requirements of Directive 1999/5/EC.
To Next Page
