Risco VUpoint RVCM52W User Manual

12
Figure 7 Control Panel Update Page
4. Click the Network Cameras link in the left-hand column; the IP Camera List
page is displayed.
Figure 8 IP Cameras List
5. Click Add Camera; the Add Camera dialog box is displayed.
Figure 9 Add Camera
6. Define the following fields in the Add Camera dialog box.
Field Description
Label Enter a name for the camera
Partitions Select the partition(s) from the list of defined partitions
Type Choose the RISCO camera type (for ONVIF or Generic camera type
settings, refer to the RISCO Cloud Installer Application Manual)
MAC Address Enter the MAC address into this field. The MAC address (media access
control address) is the unique identifier assigned to the IP camera for
communications on the physical network.
NOTE: The MAC address is case sensitive and should be entered
exactly as it is shown on the box or on the back cover of the IP camera,
e.g. AA:BB:CC:DD:EE:FF

Risco VUpoint RVCM52W Specifications

General

Brand	Risco
Model	VUpoint RVCM52W
Category	IP Camera
Language	English