Why Risco RVCM11H IP Camera shows UPnP Client Error?
The UPnP Client Error on your Risco IP Camera may occur because not all routers support UPnP, or UPnP might be disabled by default on your router. The suggested solution is to set up your IP cameras and router manually.
Overview of the VUpoint live video verification solution and the IP camera's role.
Lists key features like Plug & Play, 1.3" Megapixel, Color HD, SD card slot, and WiFi.
Details the included items such as the IP camera, mounting bracket, power adapter, and installation guide.
Instructions for ceiling and wall mounting, including surface support requirements.
Steps for connecting the power adapter and observing the power indicator light.
Guides on connecting the camera via LAN, WPS, or RISCO Cloud.
Steps to log into the application and configure camera settings via the Control Panel.
How to set up events that trigger alarms, including partition and detector events.
Manual setup for IP cameras when automatic UPnP configuration fails.
Detailed table of system, video, and audio performance parameters.
Information for contacting local representatives for service or questions.
Contact details for RISCO Group customer service and product support worldwide.
To Next Page
General
